New Products
Allstar Performance is frequently adding new products to our vast line. Check back
here to see our latest additions
|
Page:
1
2 3 4 5 6
Next 
|
 |
Peg Hooks
NEW!
Peg hooks fit standard 1" spaced peg board. Available in 2", 4", or 6" lengths, 1/8" diameter.
|
 |
Non Floater Replacement Axle
NEW!
Replacement axle for ALL68752 (58") and ALL68754 (60") Ford 9" housing kits. Axle fits ALL68754 with no modification but requires one inch cut from splined end for use in ALL68752. Complete axle assembly includes one axle, seal, bearing, bearing retainer, axle retainer bracket and wheel studs. 5.950" flange O.D., 31-spline, 30" long. Note: Axle is non compatible with ALL42120 Rotor hats.
|
 |
Pistol Grip Grease Gun
NEW!
Professional quality gun with comfort grip handle for easy one hand operation. Gun accepts a standard 14 oz. grease cartridge, features an air bleeder valve to eliminate air lock, and includes a flexible 12" long fill hose.
|
 |
Pump Bracket Kit For Bert
NEW!
Kit adapts KSE belt driven fuel pumps and fuel/PS tandem pumps to Bert bellhousing. Mounting hardware included.
|
 |
Upper Link Bracket Kit
NEW!
Bracket bolts to top of most quick change rearends to provide mounting locations for upper link and 90/10 shocks. Made from 1/4" aluminum, each bracket kit includes Grade 8 mounting hardware and aluminum sleeve spacers that can be cut to position upper link and shocks.
|
 |
Air Hose Reels
NEW!
Heavy-duty air hose reels are spring loaded for automatic rewind. A locking ratchet holds hose at the desired length. Adjustable guide arm can be angled to compensate for the mount location. Mounting base has two 1/2" wide slots and two 1/2" drilled holes for easy mounting to a suitable flat surface such as floor, ceiling, or wall. 3/8" hose with 1/4"NPT end is included. ALL10520 weight is 19.5 lbs, ALL10521 is 41 lbs. Note: ALL10525 Air Hose Kit includes three feet of 3/8" hose and two 3/8"NPT fittings to connect air hose reel to air supply. Hose may be cut to desired length before fittings are installed.
|
 |
Redhead Dry Break Valve
NEW!
Safe and effective method for refueling prevents fluid loss. Spring loaded female receptacle mounts in a variety of locations and automatically closes when male dry break is removed. Female dry break accepts 2-1/2" fuel hose. Male dry break accepts 2-1/4" fuel hose.
|
 |
Compression Tester
NEW!
Tester checks cylinder compression from 0 to 300 PSI and features an air-hold valve to reset gauge. Two brass fittings with o-rings are included for 14mm and 18mm spark plug threads. Easy to read 2-1/2" dial is encased in a metal housing with a 12" flexible hose attached.
|
 |
Radiator Air Scoop For Sprint Car
NEW!
Maximize airflow through the radiator, increase cooling efficiency and at the same time, create down force. Lightweight and durable gray plastic is 1/8" thick x 21" wide x 11" tall.
|
 |
Dirt Windshield
NEW!
Tinted scratch-proof material provides added protection to driver from wind and debris. Shield has rounded edges for a clean, smooth appearance and measures 30" long x 4-1/4" tall. Commonly used on dirt late models and modifieds.
|
|
Page:
1
2 3 4 5 6
Next
|
