New Products
Allstar Performance is frequently adding new products to our vast line. Check back here to see our latest additions
|
Page:
 Previous
1
2
3
Next 
|
 |
Aerosol Can Holder
NEW!
Unit holds six 3" diameter cans. Bolt to trailer or garage wall. Sturdy steel construction is pre-painted white. 23" long x 3-1/2" deep x 5-1/2" tall.
|
 |
Sprint Radiator
NEW!
Aluminum radiator with furnace brazed tanks provides superior cooling in sprint applications. Features machined filler neck, 1-1/2" RH bottom outlet and four female top outlet ports for use with -10AN O-ring fittings. Radiator uses a smaller diameter cap (not included) such as ALL30124 or ALL30125. Radiator is 20" wide x 22" tall x 2" wide and weighs 9.7 lbs.
|
 |
Remote Fill Master Cylinder Kit
NEW!
Remote fill master cylinder kit is used on cars and trucks that have under floor or frame mounted master cylinders. Reservoir can be mounted in engine compartment for easy inspection of fluid level. Kit includes a master cylinder, a remote fill reservoir with 7oz. capacity, two 36" lengths of hose, 4 spring clamps and two master cylinder outlet plugs. Master cylinder has a 1" bore, with shallow plunger hole (commonly used with power brake boosters) and two 3/16" inverted flare outlet fittings on each side for convenient plumbing.
|
 |
Wheel Cover For Weld Wheels
NEW!
High impact black plastic wheel cover fastens quickly with three quick-turn fasteners. For use with 15" Weld wheels.
|
 |
Bearing Spacer For Hybrid Rotor
NEW!
CNC-machined spacer fits Pinto or Mustang II spindles when used with Hybrid brake rotors (USB9850-6505), commonly used in IMCA/UMP modifieds. Once properly adjusted, spacer pre-loads the bearings by tightening against the inner races, reducing drag on the hub. All load is directed to the inside of the bearing and spacer.
|
 |
Trailing Arm Bushing
NEW!
GM bushing with rubber insert improves handling and traction. Use with stock trailing arms for race or street.
|
 |
Allstar Beanie Hat
NEW!
Black one size fits all beanie style hat has embroidered Allstar logo. 100% acrylic.
|
 |
Sway Bar Adjuster Kit
NEW!
Kit includes a CNC-machined aluminum adjuster and a 17.5" long steel arm. Adjuster is 1-1/4" x 49 splined and available in 30 degree or zero drop. On cars with limited ground clearance, the zero drop kit positions the arm at the center line of the adjuster for additional ground clearance. Adjustment screw has detents to lock at each half turn.
|
 |
Aluminum Steering Mounts
NEW!
|
 |
Tire Durometer
NEW!
Easily check tire hardness. Includes a storage pouch.
|
|
Page:
Previous
1
2
3
Next
|
